I measured my waist, the bag was perfect for the length I needed, it had no seam at the bottom, so I draw a paper template of the front part, cut it, put the template on the fabric, measured the width from both ends of the template, marked it along the length of the burlap bag and continued drawing. Then cut out my belt , leaving 1 inch allowance from both sides, this would be folded at the back.
Then I put this template on the felt and cut it, this would go at the back of the belt:
After this, I sewed the snaps on, two from each side. That would be the closure:
And finally, I glued the decor trim at the front: for my belt I chose bright blue.
Thank you for visiting my blog
Talk to you later.
I am wearing: